Controlling the Er content of porous silicon using the doping current intensity

The results of an investigation on the Er doping of porous silicon are presented. Electrochemical impedance spectroscopy, optical reflectivity, and spatially resolved energy dispersive spectroscopy (EDS) coupled to scanning electron microscopy measurements were used to investigate on the transient during the first stages of constant current Er doping. Depending on the applied current intensity, the voltage transient displays two very different behaviors, signature of two different chemical processes. The measurements show that, for equal transferred charge and identical porous silicon (PSi) layers, the applied current intensity also influences the final Er content. An interpretative model is proposed in order to describe the two distinct chemical processes. The results can be useful for a better control over the doping process

Nanochemistry aspects of titania in dye-sensitized solar cells

We analyze the main nanochemistry factors affecting photovoltaic performance in TiO2 employed as wide bandgap semiconductor in dye-sensitized solar cells (DSCs). What is the best morphology of the oxide? Which processes yield the required structures? Finally, putting the discussion in the context of the rapid evolution of photovoltaic technologies, we argue that new titania nanostructures will form the basic component of second-generation solar modules based on dye solar cells

Anti-BVDV activity evaluation of naphthoimidazole derivatives compared with parental imidazoquinoline compounds.

Background: Pestivirus genus includes animal pathogens which are involved in economic impact for the livestock industry. Among others, Bovine Viral Diarrhoea Virus (BVDV) establish a persistent infection in cattle causing a long list of symptoms and a high mortality rate. In the last decades, we synthesised and reported a certain number of anti-BVDV compounds. Methods: In them, imidazoquinoline derivatives turned out as the most active. Their mechanism of actions has been deeply investigated, BVDV RNA-dependent RNA polymerase (RpRd) resulted as target and the way of binding was predicted in silico through three main H-bond interaction with the target. The prediction could be confirmed by target or ligand mutation. The first approach has already been performed and published confirming the in silico prediction. Results: Here, we present how the ligand chemical modification affects the anti-BVDV activity. The designed compounds were synthesised and tested against BVDV as in silico assay negative control. Conclusion: The antiviral results confirmed the predicted mechanism of action, as the newly synthesised compounds resulted not active in the in vitro BVDV infection inhibitio

Photocatalytic degradation of dyes by using a membrane reactor

Dyes are organic compounds used in textile, food and drug industries, and their abatement represents one of the main problems in the treatment processes because generally they are very stable toxic compounds. In this work, two commercial azo-dyes, i.e. Congo Red (C32H22N6Na2O6S2) and Patent Blue (C27H31N2NaO6S2), in aqueous solution were degraded in a photocatalytic membrane reactor by using TiO2 Degussa P25 as the catalyst. Different system con\ufb01gurations and irradiating sources were studied, and the in\ufb02uence of some operational parameters such as the pressure in the membrane cell and the initial concentration of the substrates was determined. A comparison between suspended and entrapped TiO2 was also done. The experimental results showed a satisfactory degradation ef\ufb01ciency of the photocatalytic membrane process. The in\ufb02uence of various parameters (e.g. feed concentration, recirculation rate) has been discussed to obtain high reaction rates, operating stability and high membrane rejection, both for substrates and by-products. Congo Red was photodegraded with higher rate under the same experimental conditions probably due to its higher adsorption onto the catalyst surface. It was possible to treat successfully highly concentrated solutions (500 mg/L) of both dyes by means of a continuous process obtaining good values of permeate \ufb02uxes (30\u201370 L/m2 h); this could be interesting for industrial applications. The reactor containing the suspended photocatalyst was signi\ufb01cantly more ef\ufb01cient than the reactor containing the catalyst entrapped into the membrane

Alcohol-Selective Oxidation in Water under Mild Conditions via a Novel Approach to Hybrid Composite Photocatalysts

The oxidation of alcohols to carbonyl compounds in a clean fashion (i.e., with water as a solvent or under solvent-free conditions, and using O2 or H2O2 as the primary oxidant) is the subject of considerable research efforts. A new approach for the selective oxidation of soluble aromatic alcohols in water under mild conditions via a novel composite photocatalyst has been developed. The catalyst is synthesized by grafting 4-(4-(4-hydroxyphenylimino)cyclohexa-2,5dienylideneamino)phenol and silver nanoparticles onto the surface of moderately crystalline titanium dioxide. The titanium dioxide-based composite was first extensively characterized and then employed in the catalytic oxidation of 4-methoxybenzyl alcohol to 4-methoxybenzaldehyde under UV irradiation in water at room temperature. The corresponding aldehyde was obtained with unprecedented high selectivity (up to 86 %). The method is general and opens the route to fabrication of photocatalytic composites based on titanium dioxide functionalized with shuttle organic molecules and metal nanoparticles for a variety of oxidative conversions

Selective aqueous oxidation of aromatic alcohols under solar light in the presence of TiO2 modified with different metal species

A set of metals modified TiO2 photocatalysts were prepared starting from titanium tetraisopropoxyde and different metal precursors to study the influence of the addition of the various foreign agents on the physico-chemical and photocatalytic properties of the catalysts. The powders were characterized by X-ray diffraction, Raman spectroscopy, specific surface area measurements, scanning electron microscopy, energy dispersive X-ray spectroscopy, UV–Vis diffuse reflectance spectroscopy, photoluminescence, temperature programmed desorption after CO2 adsorption. The photocatalytic activity was evaluated using as probe reactions the partial oxidation of three aromatic alcohols: benzyl alcohol (BA), 4-methoxy benzyl alcohol (4-MBA), and 4-hydroxy benzyl alcohol (4-HBA) under simulated solar light irradiation. Different oxidation and selectivity values were obtained for the three substrates depending not only on the type of metals but also on the nature and position of the substituent in the phenyl ring of benzyl alcohol. As a general behaviour, the doped samples allowed the achievement of a greater selectivity especially for 4-MBA even if sometimes with minor conversions. The presence of W or Nb was beneficial for both conversion and selectivity for all the substrates with respect to bare TiO2. Graphical abstract: [Figure not available: see fulltext.

Immunophenotypic analysis of cell cycle status in acute myeloid leukaemia: relationship to cytogenetics, genotype and clinical outcome

Cell cycle status may play an important role in directing patient therapy. We therefore determined the cell cycle status of leukaemic cells by immunophenotypic analysis of bone marrow trephine biopsies from 181 patients with acute myeloid leukaemia (AML) and correlated the results with biological features and clinical outcome. There was considerable heterogeneity between patients. The presenting white cell count significantly correlated with the proportion of non-quiescent cells (P < 0·0001), of cycling cells beyond G1 (P < 0·0001) and the speed of cycling (P < 0·0001). Profiles in acute promyelocytic leukaemia (APL) differed from non-APL and were consistent with more differentiated cells with reduced proliferative potential, but no significant differences were observed between non-APL cytogenetic risk groups. NPM1 mutations but not FLT3 internal tandem duplication (FLT3ITD ) were significantly associated with a higher proportion of cells beyond G1 (P = 0·002) and faster speed of cycling (P = 0·003). Resistance to standard cytosine arabinoside and daunorubicin induction chemotherapy was significantly related to a slower speed of cycling (P = 0·0002), as was a higher relapse rate (P = 0·05), but not with the proportion of non-quiescent cells or actively cycling cells. These results show a link between the cycling speed of AML cells and the response to chemotherapy, and help to identify a group with a very poor prognosis

Inhibition of enterovirus a71 by a novel 2-phenyl-benzimidazole derivative

Enterovirus A71 (EV-A71) infection has emerged as a significant public health concern at the global level. Epidemic events of EV-A71 have been reported worldwide, and this succession of outbreaks has heightened concern that EV-A71 may become a public health threat. In recent years, widespread A71 enterovirus also occurred in European countries. EV-A71 infection causes hand-foot-mouth disease (HFMD), herpangina, and fever. However, it can sometimes induce a variety of neurological complications, including encephalitis, aseptic meningitis, pulmonary edema, and acute flaccid paralysis. We identified new benzimidazole derivatives and described theirin vitrocytotoxicity and broad-spectrum anti-enterovirus activity. Among them, derivative 2b resulted in interesting activity against EV-A71, and therefore it was selected for further investigations. Compound 2b proved to be able to protect cell monolayers from EV-A71-induced cytopathogenicity, with an EC50 of 3 µM. Moreover, Vero-76 cells resulted in being significantly protected from necrosis and apoptosis when treated with 2b at 20 and 80 µM. Compound 2b reduced viral adsorption to Vero-76 cells, and when evaluated in a time-of-addition assay, the derivative had the highest effect when added during the infection period. Moreover, derivative 2b reduced viral penetration into host cells. Besides, 2b did not affect intestinal monolayers permeability, showing no toxic effects. A detailed insight into the efficacy of compound 2b against EV-A71 showed a dose-dependent reduction in the viral titer, also at low concentrations. Mechanism of action investigations suggested that our derivative can inhibit viral endocytosis by reducing viral attachment to and penetration into host cells. Pharmacokinetic and toxicity predictions validated compound 2b as a good candidate for furtherin vivoassays

ESA SENTINEL 2 IMAGERY AND GBGEOAPP: INTEGRATED TOOLS FOR THE DEOSAI NATIONAL PARK MANAGEMENT PLAN

Deosai plateau, in the Gilgit-Baltistan Province of Pakistan, for its average elevation of 4,114 meters, is the second highest plateau in the world after Changtang Tibetan Plateau. Two biogeographically important mountain ranges merge in Deosai: the Himalayan and Karakorum–Pamir highlands. The Deosai National Park, with its first recognition in 1993, encompasses an area of about 1620 km2, with the altitude ranging from 3500 to 5200 meters a.s.l. It is known and visited by tourists for the presence of brown bear, but a large number of species of fauna and flora leave, and can be seen during the summer season. This high-altitude ecosystem is particularly fragile and can be considered a sentinel for the effects of climate changes. Due to its geographic position and high altitude, the area of Deosai has never been studied in all its ecosystem components, producing high resolution maps. The first land cover map of Deosai with 10 meters of resolution is discussed in this study. This map has been obtained from Sentinel-2 imagery and improved through the new tool developed in this study: the GBGEOApp. This application for mobile has been done with three main ambitions: the validation of the new land cover map, its improvement with land use information, and the collection of new data in the field. On the basis of the results, the use of the GBGEOApp, as a tool for validation and increasing of environmental data collection, seems to be completely applicable involving the local technicians in a process of data sharing